MIMAKI UJF-605C, Руководство по эксплуатации

Страница: 76 / 154

- 3-8 -
ERROR 70
WATER LACK
Replacing waterin water heater tank
In order to keep the ink at an appropriate temperature, operate the water heater. Supply
antifreezing liquid and water to the hot-water tank in the water heater.
Precautions for replacing or exchanging
• Water cannot be added.
• Be sure to use Soft water for replacing or exchanging.
• Soft Water and antifreezing liquid compound ratio should be
2 (Soft water) : 1 ( Antifreezing liquid). When performing complement or
replacement later, make a compound liquid in same proportion of 2 : 1.
• When only Soft Water is supplied to the hot-water tank without antifreezing
liquid, it may damage the head.
• Check the water heater once a half year for the water level required and
cleanliness inside the hot-water tank.
• If Soft Water in the hot-water tank frequently becomes insufficient, contact
your nearest sales agency or Mimaki sales office.
• Discard the waste water mixed with Anti-freezing liquid according to the
local regulations of the area this unit is used.
Precautions in handling the Anti-freezing liquid
• Be sure to wear goggles and gloves for handling the Anti-freezing liquid.
• Use the exclusive Anti-freezing liquid by Mimaki , or the heater may be
damaged.
• If the Anti-freezing liquid gets on the skin or clothes, immediately wash it off
with soap. If you gets the Anti-freezing liquid in your eyes, immediately
wash your eyes with a lot of clean water. Then, consult a doctor as soon as
possible.
• Be sure to store the Anti-freezing liquid in a cold and dark place.
• Store the Anti-freezing liquid in a place that is out of the reach of children.
• When unused the Anti-freezing liquid, entrust them to an industrial waste
disposal contractor, clarifying their contents.
• Before using the Anti-freezing liquid, be sure to read the Material Safety
Data Sheet (MSDS).
• When purchasing a hot-water tank for spare, contact your nearest sales
agency or Mimaki sales office.
• Prepare a polyethylene tank for moving waste the water from hot-water
tank.
• When water in the hot-water tank is insufficient, the error message shown
below is indicated. In this case, replace water.