MIMAKI UJF-605C, Руководство по эксплуатации

Страница: 23 / 154

- 1-3 -
Method of moving the device
When moving the device, it must be held the corners up by at least four persons.
• When moving the device to a different place, contact local representative
of Mimaki Engineering. If you move it, failure of damage may occur.
Be sure to request a specialist to move the device.
• Be sure to disconnect the power cable and the interface cable before
moving the device.
• Before moving the unit, wait until the UV lamp is cooled.
• When moving the device, take care not to apply excessive shock to it.
• Be sure to adjust the level feet to level the device at the new location.
• Do not hold the table or ink cartridge, or it may give damage to the unit.
• When moving the unit, carry it slowly and take care not to give shock to it.
Level feet
Before moving the device, sufficiently raise the level feet of the table frame. When installing
the unit, lower the level feet.
• This unit has eight level feet. Lower
them sequentially and slowly, taking
care so that the gaps between the
casters and the floor are nearly even.