MIMAKI UJF-605C, Руководство по эксплуатации

Страница: 126 / 154

- 5-22 -
<<LOCAL>>
TYPE *
UV LEVEL
<ent>
TYPE *
LAYER 2
:NORMAL
10. Select the light level by pressing the [ ] or
[ ] key.
When selecting the [INVALID], the layer is printed
by the light level of the previous layer after that.
Ex.: For 4 layers, select the [INVALID] of the
layer 3 and the light level of the layer 1 and
2 become effective. That allows the repeat-
ability of the layer by effective light level.
This means the layer 3 is printed by the light
level of the layer 1, and the layer 4 is printed
by the light level of the layer 2.
11. Press the [ENTER] key.
12. Press the [END] key three times, the de-
vice returns to the LOCAL mode.
13. Check the UV ink curing level again.
Set the media on the table, then draw the test
pattern again for UV light intensity. P.5-19
• If the UV ink curing level is not changed by
adjusting the UV light intensity, the UV lamp
is deteriorated.
* Check the UV lamp irradiation duration
P.2-4, 5-16
* When setting the UV level according to
each layer, the waiting REMOTE mode can
change the layer.
P.2-21
* Check the UV lamp irradiation level
P.5-23
* Contact to your distributor for replacing the
UV lamp. P.5-16