MIMAKI UJF-605C, Руководство по эксплуатации

Страница: 38 / 154

- 1-18 -
Menu mode
There are the following three mode in this device.
Each of the three modes is explained below.
< LOCAL > mode
This is the mode in preparatory state.
All keys are effective to enable setups.
The device is able to receive data from computer, however, it will not perform printing.
In this mode, it is possible to perform the following operations.
1. Pressing the appropriate JOG keys to set up an origin and the printing area.
2. Pressing the [TEST] key to start test printing.
3. Pressing the [CLEANING] key to start cleaning the print head.
4. Pressing the [COPY] key to copy the printing data the device has received.
5. Pressing the [FUNCTION] key to set printing conditions.
< FUNCTION > mode
While the device is in the LOCAL mode, press the [FUNCTION] key to put the device into
the FUNCTION mode. This is the mode in which printing conditions can be set. Refer to the
chapter 4 “Setting Function” or chapter 5 “Maintenance”.
< REMOTE > mode
The device prints an image from data it receives.
During the printing operation, press the [REMOTE] key to interrupt the printing operation.
While the device is in the LOCAL mode, press the [REMOTE] key to put the device into
REMOTE mode.
< MEM. > mode
A Printing information (pass number, resolution, color etc.) can be memorized for copying
of multi editions, printing the data which was received.
While the device is in the REMOTE mode, press the [COPY] key to put the device into the
MEMORY mode.