MIMAKI Textile Jet Tx3-1600, Руководство по эксплуатации

Страница: 31 / 218

- 1.11 -
Carriage
The carriage is provided with print heads for printing, sensor for fabric width detection, Head
protection sensor, and etc. It is also provided with a head height adjustment screw for adjusting the
head height according to the thickness of the fabric used. The carriage moves during printing, and
fabric detection.
When cleaning the capping station, execute the STATION MAINTENANCE function to move the
carriage. (Refer to Page 3.11 “Cleaning the station interior”.)
• When setting a fabric in position for printing, be sure to adjust the cartridge
height. (Refer to Page 2.33)
• Starting the printing operation without adjusting the carriage height can
cause damage not only to the fabric but also to the device itself.
Head height adjustment rod, adjustment screw and Head protection sensor
When a fabric is set for the first time or replacing a fabric in different thickness, it is necessary to
adjust the height of the head.
• If the plotter is operated without adjusting the head height, the head may get
caught on the fabric, causing damage to the head.
• For the method of head height adjustment, see Adjusting the Head Height
[Head Height] (Refer to Page 2.33) in this chapter.
Height adjustment screw
Support screw
Secures the Height
adjustment screw to
prevent it from coming
loose.
Used to adjust the head height.
Head protection sensor
The sensor is to minimize the head damage
from the no floatly edges of the printing lines.
Head height adjustment rod
Measures the thickness of the
media to be used as a reference
for head height adjustment.
Head protection sensor
Carriage
Sensor for fabric
width detection