MIMAKI Textile Jet Tx3-1600, Руководство по эксплуатации

Страница: 163 / 218

- 4.21 -
Using the ANR unit [ANRS Setup]
Checking for the operation details when using the ANR unit in this function.
ON : Checks nozzle clogging, missing shot dots, etc. of the head during
printing using the ANR unit
OFF : Does not use the ANR unit.
STEP
1. Select a type. (Refer to Page 4.4)
Here, select [Type.1].
2. Press [ENTER] key.
3. Press [ ] and [ ] key until the display gives
the indication [ANRS Setup].
4. Press [ENTER] key.
5. Set a [Dot Check] by pressing the JOG keys [ ]
and [ ].
Here, select [ON].
6. Press [ENTER] key.
7. Set a [Interval] by pressing the JOG keys [ ]
and [ ].
Set the unit (meter or inch) for the dot check interval.
8. Press [ENTER] key.
9. JOG keys [ ] and [ ] to select the measures in
case that nozzle clogging or deflection is
detected after starting ANRS.
[CONT] ....... Continues printing.
[AUTO] ....... Interrupts printing to start Head
cleaning automatically, and then
start printing again.
[STOP] ........ Stops printing.
10. Press [ENTER] key.
SET UP
Select
: TYPE1
TYPE1
Media Comp.
< ent >
TYPE1
ANRS Setup
< ent >
TYPE1
Dot Check
: OFF
TYPE1
Dot Check
: ON
TYPE1
Check NG
: CONT
TYPE1
Check NG
: STOP
TYPE1
Interval
=2.0 m
TYPE1
Interval
= 5.0 m
TYPE1
Cleaning : Normal
→ Continue to Procedure No.10
→ Continue to Procedure No.14
→ Continue to Procedure No.14