MIMAKI Textile Jet Tx3-1600, Руководство по эксплуатации

Страница: 188 / 218

- 5.18 -
22. Remove the cleaning liquid cartridge from the
upper ink slot.
Check the status, and go to the next step.
23. Set the cleaning liquid cartridge in the lower
ink slot.
Check that there is no cleaning liquid cartridge error, and perform
cleaning.
24. Suction of the cleaning liquid starts.
25. Wash the tube, mid tank and damper with
cleaning liquid.
26. Remove the cleaning liquid cartridge from the
lower ink slot.
Check the status, and go to the next step.
27. Suction of air starts.
The tube, mid tank and damper are evacuated.
When cleaning finishes, the device enters the ink filling mode.
28. Press the JOG key [up] or [down] to select the
type of ink.
29. Press the [ENTER] key. The screen for select-
ing ink color mode appears.
30. Press the JOG key [up] or [down] to select the
ink color mode for filling.
31. Press the [ENTER] key. The screen for monitor-
ing cartridge filling appears.
32. Open the Ink Station Door.
33. Set the ink cartridge to fill.
When the cartridge is set, the filling standby screen appears.
34. Close the Ink Station Door.
Remove Washings
1 2 3 4 - - - A B C D - - - -
Set Washing Liq.
- - - - 5 6 7 8 - - - - E F G H
Washing 6 / 7
00:12:56
Remove Washings
- - - - 5 6 7 8 - - - - E F G H
Ink Type
Type : Acid
Ink Type
Type : Reac
Washing 7 / 7
00:14:00
Ink Color [Reac]
Select : 8Color
Ink Color [Reac]
Select : 4Color
Cartridge [Reac]
- - - - - - - - A B C D E F G H
Ink Filling [Reac]
Start :ent