MIMAKI Textile Jet Tx3-1600, Руководство по эксплуатации

Страница: 144 / 218

- 4.2 -
Aplication Functions
The application functions make it possible to modify the printing conditions that have been set for
source data received from the computer. The [FUNCTION] key is used to set up the application
functions.
FUNCTION MENU
Of the menus that are provided for setting printing conditions for the device, the menu for setting up
the device functions is called the function menu. In order to set printing conditions properly, it is
necessary to understand the structure and operation of the function menu.
The function menu consists of four major items - [Set-up], [Maintenance], [Display] and [Media
set]. In this chapter, [Set-up] and [Display] of the function menu are explained. (For “Maintenance”
of the function menu, see Chapter 5 “Maintenance Functions.”)
[SET UP]
•
[DISPLAY]
The table, below, shows the tree structure of the function menu.
In order to use the application functions of the device, it is necessary to understand the proper
sequence of key operations.
In Set-up of the function menu, allocate printing methods to be set to Types 1 to 4 before detailed
setting of the individual printing conditions so that you can use the printing conditions registered by
type.
[FUNCTION] TYPE1 to 4 Media Comp. -500 to 500
SET UP
Print Mode Quality STD, FINE, HIGHspd
Direction UNI-D, BI-D
Ink Layers 1 to 9
Priority Media Comp. : HOST, PLOT PrintMode : HOST, PLOT
InkLayers : HOST, PLOT Refresh : HOST, PLOT
Belt Wash : HOST, PLOT Heater. : HOST, PLOT
ANRS : HOST, PLOT
Margin RightMargin -9 to 95mm
LeftMargin -9 to 95mm
Refresh Level 0 to 3
Counter Limit Adhesive, Absorb Rlr
mm/inch inch, mm
AutoClean OFF, ON
Feeding Dev OFF, ON
Take-Up Dev OFF, ON
Spiral Rlr OFF, ON
Belt Wash OFF, ON
Heater LOW, MID, HIGH, ODD
ANRS Setup Dot check Interval Check NG Cleaning
Retry Count MediaEnd
ANRS Ctrl Total NG Adjoining NG MissShot MissShot NG
SetupReset Reset
[FUNCTION] See Chapter 5 “Maintenance Functions”.
MAINTENANCE
[FUNCTION] ENGLISH , JAPANESE , PORTUGUESE , ITALIANO , ESPANOL , FRANCAIS , DEUTSCH
DISPLAY
[FUNCTION] Reset
MEDIA SET