MIMAKI Textile Jet Tx3-1600, Руководство по эксплуатации

Страница: 164 / 218

- 4.22 -
11. Select the method of cleaning by pressing the
JOG keys [ ] and [ ].
Normal : Select this if any line is bent. Cleaning is carried out for
a long period of time and a large amount of ink is
consumed.
Soft :
Select this if there is any missing line. Cleaning is
carried out for a short period of time.
Strong : Select this if there are many missing portions.
• Cleaning setting enable to change the
method when Check NG setting is AUTO
only.
(Refer to Page 4.21, step 9)
12. Press [ENTER] key.
13. Enter the retry count value by pressing JOG
key [ ] and [ ].
Enter the counting number for Retry cleaning when the ANR unit
has found the nozzle clogging after cleaning.
• Cleaning setting enable to change the
method when Check NG setting is AUTO
only.
(Refer to Page 4.21, step 9)
14. Press [ENTER] key.
15. JOG keys [ ] and [ ] to select the measures in
case that the ANRS runs out during printing.
[CONT] ....... Continues printing.
[STOP] ........ Immediately stop printing when the ANRS check
media has run out. Replace with a new one.
[1File] .......... Continues printing till present file is terminated. The
next one cannot be printed.
• If using the non-Mimaki genuine ANRS
check media, we can not guarantee the
normal operation. Be sure to use the
genuine ANRS check media.
16. Press [ENTER] key.
TYPE1
MediaEnd
: STOP
TYPE1
Color :12345678
TYPE1
MediaEnd
: CONT
TYPE1
Cleaning : Soft
TYPE1
Retry Count
= 0
TYPE1
Retry Count
= 3