MIMAKI Textile Jet Tx3-1600, Руководство по эксплуатации

Страница: 154 / 218

- 4.12 -
Setting the indication period of maintenance [Count Limit]
This procedure gives the setting the indication period of maintenance for applying adhesive on the
belt or cleaning the absorption roller.
Adhesive : Setting the indication period of maintenance for applying adhesive.
Absorb Rlr. : Setting the indication period of maintenance for cleaning the ab-
sorption roller.
• For the setting, the message is indicated before maintenance and then,
you can print without worrying about maintenance period. In case it has
not entered a value for the setting, the message won’t be indicated.
STEP
1. Select a type. (Refer to Page 4.4).
Here, select [Type.1].
2. Press [ENTER] key.
3. Press [ ] and [ ] key until the display gives
the indication [Count Limit].
4. Press [ENTER] key.
5. Press [Enter] key to select [Adhesive].
6. Set a Limit by pressing the JOG keys [ ] and
[ ].
The setting for the range 0 to 30000 meter in increments of 1 meter
unit is available. Initial value is [0] meter.
• The period limit is 1000 meter.
In case it has not entered a value for the
setting, the message won’t be indicated.
SET UP
Select
: TYPE1
TYPE1
Media Comp.
< ent >
TYPE1
Count Limit
< ent >
TYPE1
Sel : Adhesive
TYPE1
SetLimit =
0mm
TYPE1
SetLimit =
1000mm
Belt Adhesive
300m To Go
Belt Adhesive
Reapply Adhesive
Water Absorption
Check The Roller