MIMAKI Textile Jet Tx3-1600, Руководство по эксплуатации

Страница: 145 / 218

- 4.3 -
Before Setting Printing Conditions In The Function Menu
The basic operation of the function menu for setting individual printing conditions is explained
below. Set the individual printing conditions in the function menu after performing the following
three operations.
1. Check that the menu mode is the LOCAL mode.
2. Check that the language in which to display characters on the LCD has been selected.
3. Select a Type to register the sequence of set printing conditions.
Before setting the printing conditions in the function menu, confirm the basic operations and then set
the individual printing conditions described on the pages that follow.
Checking the menu mode
Check the menu mode before setting the printing conditions.
The menu mode must be either the LOCAL mode or the FUNCTION mode.
Check also that the mode displayed on the LCD is either <<LOCAL>> or <<FUNCTION>>.
(Refer to Page 1.16)
Setting the display language
Set the language in which to display characters on the LCD. “English” has been set as the initial
display language of the device. Try to change the display language to “Japanese” here.
STEP
1. Make sure that the device enters the LOCAL
mode.
2. Press [FUNCTION] key.
3. Press JOG key [ ] twice.
4. Press [ENTER] key.
5. Select the language to be used for the indica-
tion on the display using the [ ] and [ ] key.
There are seven different languages from which you can select one
as the display language.
[[ENGLISH], [JAPANESE], [PORTUGUESE], [ITALIANO],
[ESPANOL], [FRANCAIS], [DEUTSCH]
6. After you have selected the desired display
language, press [ENTER] key.
The device enters the LOCAL mode.
<< LOCAL >>
width : 1620mm
<< ローカル >>
ハバ : 1620mm
DISPLAY
JAPANESE
< ent >
DISPLAY
ENGLISH
< ent >
FUNCTION
DISPLAY
< ENT >
FUNCTION
SET UP
< ENT >
Twice