MIMAKI Textile Jet Tx3-1600, Руководство по эксплуатации

Страница: 13 / 218

- ix -
Precautions in installation
A place exposed to direct sunlight
• Do not expose the device to
direct sunlight, or the work
may be discolored.
A place where the temperature and humidity
fluctuate greatly
Use the device under the
following environment.
Operating environment
15 to 30 o C (59 to 86 o F)
35 to 65 % (Rh)
A place exposed to direct air blow from air
conditioner, etc
• Do not install the device to
direct air blow from air
conditioner, etc, or you may
get spattered with the ink.
A place that is out of the horizontal
• Do not place the device where
the device cannot be
horizontally installed, or you
may not secure the stabilized
plot work.
CAUTION
A place that vibrates
• Do not install the device at the
place that vibrates, or you may
not secure the stabilized plot
work.
A place full of dust or cigarette smoke
• Do not install the device where
is full of dust or cigarette
smoke, or the dust may adheres
to the device and cause the
deflection phenomena of ink
drops.
A place where has a drain or a drainage
facilities
• Connect a hose in the place
near the water supply facilities
when using direct piping for belt
cleaning.
Make sure to install this device
at the place where has a drain
or a drainage facilities.
• This device may cause water
leakage by clogged filter in the
cleaning liquid tank. Make sure
to install this device at the place
where has a drain or a drainage
facilities.