MIMAKI Textile Jet Tx3-1600, Руководство по эксплуатации

Страница: 120 / 218

- 3.12 -
Open and close the station cover
• Make sure to chain the station cover when performing maintenance with
the cover opened, or it may cause an unexpected hurt by the shutting
cover.
Periodical cleaning of the wiper
Cleaning the wiper
The wipers are provided for cleaning the heads. As the device is used to plot images, the wipers
gradually become stained with ink and dust. Clean stained wipers.
The wiper is separately available from your local distributor or our office.
Notes on handling the wipers
• Don’t touch the rubber part of the new wiper. It will result in clogged
nozzle.
• Clean the two wipers at a time.
• The front side of each wiper is made of felt, and the rear side is made of
rubber.
Do not rub the felt side with a swab. Instead, press the swab against the
felt side surface to remove dirt. Rubbing the felt side surface will make it
fluffy and result in clogged nozzle. Wipe ink off the rubber side surface
with a swab.
• When executing this function, the carriage will come out of the capping
station. If the carriage is left in the aforementioned state for an extended
period of time, the nozzles can be clogged. Once the replacement of the
wiper and the cleaning of the caps have been completed, immediately
press [ENTER] key to allow the carriage to return to the capping station.
Felt surface
Capping station side
Rubber surface
Station cover R
Station cover L