MIMAKI Textile Jet Tx3-1600, Руководство по эксплуатации

Страница: 153 / 218

- 4.11 -
When using the device in an extremely dusty or dry place [Refresh]
Solidification of ink can be prevented by refreshing the head during printing.
If the device is used in a dusty place or dry place, ink in the head will be likely to solidify. Execute
the REFRESH function to enable the ink to be ejected properly from the print head. Concerning the
frequency of refreshing of the ink nozzle, there are four levels—Level 0 to 3.
LEVEL 0 : Frequency of refreshing is low.
LEVEL 1 : Frequency of refreshing is normal.
LEVEL 2 : Frequency of refreshing is slightly high.
LEVEL 3 : Frequency of refreshing is high.
STEP
1. Select a type.
(Refer to Page 4.4). Here, select [Type.1].
2. Press [ENTER] key.
3. Press [ ] and [ ]key until the display gives
the indication [Refresh].
4. Press [ENTER] key.
5. Set a refresh level by pressing the JOG keys
[ ] and [ ].
There are four refresh levels from which you can select.
[LEVEL0], [LEVEL1], [LEVEL2], [LEVEL3]
Here, select [LEVEL2].
6. Press [ENTER] key.
7. Press [END] key twice, and the menu returns to
the LOCAL mode.
SET UP
Select
: TYPE1
TYPE1
Media Comp.
< ent >
TYPE1
Refresh
< ent >
TYPE1
Refresh
: LEVEL1
TYPE1
Refresh
: LEVEL2
TYPE1
Refresh
< ent >
<< LOCAL >>
width : 1620mm