MIMAKI Textile Jet Tx3-1600, Руководство по эксплуатации

Страница: 101 / 218

- 2.47 -
• Make judgment from the result obtained
after 4 scans (for 4-pass printing) or 8
scans (for 8-pass printing).
• The unit of the correction value is the
same as in “Media Comp.” in the LOCAL
mode.
(Refer to Page 2.44)
• Setting value is to be Reset as follow,
*Perform the “Media Comp.” .
*Perform the “SetupReset”
5. Press [ENTER] key.
Confirm the fabric feed rate before saving it.
6. Press [ENTER] key to return to the REMOTE
display.
The changed setting value is saved. The value is to be in effect
performing till the turning off.
Press [END] key to return to the REMOTE display. The changed
setting value is to be in effect performing till the turning off.
7. In case the setting value has changed before,
the indicate gives [+] mark beside of the TYPE.
In the same way, the indicate gives [-] mark beside of the TYPE
when the setting value has changed.
<REMOTE>
TYPE1+ 0.0 m
Feed Comp. − 200
Save : ent
<REMOTE> V360 x 360
TYPE1+ 0.0 m