Medrad Mark 7 Arterion, Руководство по эксплуатации

Страница: 38 / 162

MEDRAD
®
Mark 7 Arterion Injection System
6 - 30
6.1.2 Actuals Window
The Actuals window displays Peak (maximum Flow Rate achieved), Delivered (actual total volume
delivered), Total Contrast (total volume delivered for the current case), and the End Case button. An
operator presses the End Case button after completing a patient procedure and before removing the
disposables to retract the syringe plunger. This button also zeroes the Total Contrast and creates a new
case entry on the
History tab. For more information on cases, see "6.3 - History Tab" .
6.1.3 Sentinel Window
The Sentinel window displays system messages, such as “Rotate head down to arm”. The Sentinel
window also displays the status of the last injection.
The Sentinel window message flashes momentarily when the system cannot arm.
A list of messages is available in Chapter 13 “System Messages.”
6.2 Protocols Tab
Operators can store new protocols, recall stored protocols, and edit existing protocols on the Protocols
tab. For information on how to manage protocols from the Protocols tab, see "9.2 - Manage Protocols
from the Protocols Tab" .
NOTE:
To set protocol parameters from the Home tab, see "9.1 - Set Injection Parameters
from the Home Tab" .
6.3 History Tab
The History tab shows a list of recent injections with date and time of the injection and the
programmed parameters and actuals. Injections are grouped by case. Cases are reset when an
operator selects the
End Case button from the Home tab.
For example, an operator may want to group all of the injections for one patient together. The operator
performs all of the injections for a patient. The operator then selects the
End Case button after the last
injection has completed. The system groups all of the injections for that patient together. This group of
injections can be retrieved from the
History tab.
6.4 Options Tab
Operators can modify system settings from the Options tab. A green LED displays beside the current
setting for each option. When an operator changes a setting, the system adds an asterisk next to the
option name to identify unconfirmed setting changes. To enable the new settings, select one of the
other tabs, such as
Home . A popup displays requesting confirmation for the new value. Select Yes to
confirm the setting. Select No to go to the selected tab without saving the changes; the system reverts
to the previous settings.
Table 6 - 1: Options
Option Description
Language Sets the Display Control Unit display language.
Flow Rate Select mL/m or mL/s.
Fill Volume
Determines the volume of contrast drawn into the syringe when an
operator presses the
Auto-Fill button on the Injector Head.
Fill Speed
Determines the speed at which the injector draws contrast into the
syringe when an operator presses the
Auto-Fill button on the Injector
Head.