Medrad Mark 7 Arterion, Руководство по эксплуатации

Страница: 29 / 162

System Overview
5 - 21
5.3.2 Technical Specifications
5.4 High Pressure Connector Tubing Specifications (Non-Twist & Go)
The injection system was designed to use the MEDRAD Mark 7 Arterion Syringe and Twist and Go
Syringe. When using the Mark 7 Arterion Syringe, tubing should meet the following specifications to
operate in a safe and effective manner.
• Disposable tubing shall be rated to a minimum of 1200 psi
• Disposable tubing shall have a minimum internal diameter of .070" with a maximum length
of 72".
• Syringe interface luer shall be a standard female luer as defined in:
•
ISO 594-1:1986
• EN 20594-1:1993/AC:1996/A1:1997.
• Catheter interface luer shall be a standard male luer as defined in:
•
ISO 594-1:1986
• ISO 594-2: 1998
• EN 20594-1:1993/AC:1996/A1:1997.
• Disposable tubing shall be made from a clear polymeric material that allows for proper
visualization of fluid path to ensure all air has been adequately purged with fluid before
connection to a patient.
Table 5 - 1: System Technical Specs
Flow Rate:
0.1-45.0 mL/s in 0.1 mL/s
increments (single and phased)
0.1-59.9 mL/m in 0.1 mL/m
increments (single mL/m)
1.0-10.0 mL/s in 0.1mL/s
increments (variable)
Volume: 1-150 mL in 1 mL increments
Pressure Limit (150 mL
syringe):
100-1200 psi in 1 psi increments
689-8273 kPa in 1 kPa increments
Rise Time: 0.0-9.9 seconds in 0.1s increments
Delay Time:
0.0-99.9 seconds in 0.1s
increments
Manual Fill Speed: 1-20 mL/s in 1 mL/s increments
Auto Fill Speed: 1-10 mL/s in 1 mL/s increments
Fill Volume: 1-150 mL in 1 mL increments
Syringe Size: 150 mL
Protocol Memory: 39 Protocols (4 default, 35 storable)
Injection History Memory Approximately 50 injections