Medrad Mark 7 Arterion, Руководство по эксплуатации

Страница: 55 / 162

Setting and Managing Protocols
9 - 47
Figure 9 - 7: Protocols Tab - Variable Flow Rate Protocols
3.
Select the blank blue button (A).
NOTE:
If a blank button is not visible, scroll through the list of protocols until one displays.
If a blank button is not available or
0 Available displays in the upper right corner,
the system cannot store any more protocols. Delete a protocol to add a new one.
4.
Enter the protocol name.
5.
Select a parameter and enter the values for the selected parameter.
NOTE:
If an operator tries to commit a value outside of the acceptable range, an audible
beep sounds and the parameter range blinks in the keypad.
6.
Select a different parameter to commit the values.
7.
Select Save .
9.2.2 Recall a Stored Protocol
An operator can recall a protocol for use, view the parameters, edit the parameters, or delete the
protocol.
1.
Select the Protocols tab. The currently selected protocol (A) on the Home tab displays at the
top of the list.
Figure 9 - 8: Active Protocol