Medrad Mark 7 Arterion, Руководство по эксплуатации

Страница: 56 / 162

MEDRAD
®
Mark 7 Arterion Injection System
9 - 48
2.
Select the Type button to display the type of protocol to be recalled.
3.
Select the Sort button to sort the protocols. The options are:
• Sort A-Z
• Sort Z-A
• Most Frequently Used
• Most Recently Used
4.
Press the up or down arrow to locate the protocol.
5.
Select the protocol name to load the protocol for use. The system returns to the Home tab
with the selected protocol parameters displayed.
9.2.3 Edit an Existing Protocol
9.2.3.1 Edit Single ml/s or ml/m or Variable Flow Rate Protocol
1.
If in the Armed state, select Disarm .
2.
Select the Protocols tab.
3.
Select the Type button to display the protocol type to be edited.
NOTE:
If the Variable Flow Rate type is not displayed, go to the Options tab to enable
MEDRAD
®
VFlow. See "6.4 - Options Tab" .
4.
Navigate to the desired protocol.
5.
Select the Edit button.
6.
Select a parameter to change it.
7.
Use the keypad to enter the new values.
8.
Commit the value by selecting Enter or another parameter.
9.2.3.2 Edit Phased mL/s Protocol
1.
If in the Armed state, select Disarm .
2.
Select the Protocols tab.
3.
Select the Type button to display the protocol type to be edited.
NOTE:
If the Phased type is not displayed, go to the Options tab to enable Phased
Protocol. See "6.4 - Options Tab" .
4.
Navigate to the desired protocol.
5.
Select the Edit button.
6.
To edit phases:
a.
Select a parameter. The phased protocol displays.
b.
Locate the phase to be edited.
c.
Select a parameter, such as Volume or Flow Rate .
d.
Use the keypad (A) to enter the values for the selected parameter.