Medrad Mark 7 Arterion, Руководство по эксплуатации

Страница: 54 / 162

MEDRAD
®
Mark 7 Arterion Injection System
9 - 46
Figure 9 - 6: Index Number
c.
To enter a new phase, select an empty index number (C). A new phase is added with
default values for flow rate and volume.
d.
Enter the phase values, as needed
NOTE:
The currently selected values update in the top row parameters. The value in the
Phased Selection pane does not update until the value is committed.
e.
To commit the values, select a different parameter.
f.
Repeat this step for each phase to be added.
6.
Select Pressure or Rise Time .
a.
Enter the parameter values.
b.
To commit the values, select a different parameter.
c.
Repeat this step for each parameter to be set.
NOTE:
The operator enters the initial rise time. The intra-phase rise time is fixed.
7.
Select Save .
9.2.1.3 Create a New Variable Flow Rate Protocol on the Protocols tab
A Variable Flow Rate protocol injects a set Volume of contrast at a Flow Rate determined by the Hand
Controller. As an operator depresses the Hand Controller plunger, the system increases the flow rate
until it reaches the maximum Flow Rate set by the operator.
NOTE:
If the Variable Flow Rate option is not visible, go to the Display Control Unit Options
tab to enable MEDRAD VFlow. See "6.4 - Options Tab" .
NOTE:
ISI does not function with Variable Flow Rate protocols.
1.
Select the Protocols tab.
2.
Select the Type button until Variable is highlighted. A list of Variable Flow Rate protocols
displays.