Medrad Mark 7 Arterion, Руководство по эксплуатации

Страница: 45 / 162

Using and Understanding the Injector Head
7 - 37
7.6 Injector Head Controls
The Injector Head Controls on the injection head display contain the Enable button, Enable Indicator,
Fill Strip , and Auto-Fill button.
7.6.1 Enable Button (F)
The Enable button activates the Fill Strip and Auto-Fill button. After pressing the Enable button, the
Enable Indicator (G) illuminates and the Fill Strip and Auto-Fill button stay active while in use or for
five seconds of inactivity.
7.6.2 Fill Strip (H)
The Fill Strip allow operators to advance and retract the piston on the Injector Head. After pressing the
Enable button, press the forward arrows (closest to syringe) to advance the piston, or press the
reverse arrows (farthest from syringe) to retract the piston. The piston speed increases progressively
as an operator presses the arrows farther away from the
Enable button.
7.6.3 Auto-Fill Button (I)
The Auto-Fill button fills the syringe with a user-defined contrast volume and at a user defined speed.
After pressing the
Enable
button, press the
Auto-Fill
button. Configure the volume and speed from the
Options tab. See "6.4 - Options Tab" .
7.6.3.1 Auto-Fill Button with 15 mL Purge Configuration Options
7.7 Armed Light
The Armed Light (J) remains illuminated when the system is armed. The light flashes once every
second when injecting
Figure 7 - 5: Armed Light
Table 7 - 2: 15 mL Purge Configuration Options
15 mL Purge ON 15 mL Purge OFF
Auto-Fill available for use in any Injector position.
Auto-Fill only available for use in the Injector’s
upright position.