Medrad Mark 7 Arterion, Руководство по эксплуатации

Страница: 122 / 162

MEDRAD
®
Mark 7 Arterion Injection System
16 - 114
Figure 16 - 45: Floor Mount Mounted to Floor
NOTE:
The minimum bend radius for the Injector Head Extension Cable is seven inches
and five inches for the Display Control Unit Cable.
16.6.6.2.1 Installing the Floor Bracket and Panel Mount Plate
NOTE:
Before drilling, check clearance behind the desired mounting location on the floor.
Ensure that no cables or other hardware will interfere with the installation and
function of the Floor Cable Bracket.
1.
Pre-drill mounting holes using the template provided in Floor Mount Cable Bracket Hole
Template in Appendix A as a guide.
NOTE:
DO NOT photocopy the template as photocopying may distort the image. ALWAYS
MEASURE BEFORE DRILLING
2.
Thread MEDRAD Mark 7 Arterion Injection System Injector Head Extension Cable and Display
Control Unit Cable through the floor opening.
NOTE:
Avoid routing extension cables with high power cables.
3.
Locate the Floor Cable Bracket (A). Remove the four screws (B) attaching the insert to the
bracket.
Figure 16 - 46: Floor Cable Bracket Assembly
4.
Discard the screws and the insert.
5.
Remove the cable strain relief from the cables to be mounted as shown below.
Mechanical Hazard - Minor or moderate patient and/ or worker injury may result.
• Do not create a trip hazard when installing cable bracket.
CAUTION