Mazda 6 2002, Руководство по ремонту

Страница: 880 / 1248

S–120
TROUBLESHOOTING [POWER WINDOW SYSTEM]
INTERMITTENT CONCERN TROUBLESHOOTING
A6E778058000W01
Vibration Method
•
If malfunction occurs or becomes worse while driving on a rough road or when engine is vibrating, perform the
steps below.
Note
•
There are several reasons why vehicle or engine vibration could cause an electrical malfunction. Some of
the things to check for:
— Connectors not fully seated.
— Wire harnesses not having full play.
— Wires laying across brackets or moving parts.
— Wires routed too close to hot parts.
•
An improperly routed, improperly clamped, or loose harness can cause wiring to become pinched
between parts.
•
The connector joints, points of vibration, and places where wire harnesses pass through the firewall, body
panels, etc. are the major areas to be checked.
•
Check for DTCs or malfunctions by shaking
harnesses and connectors that are
suspected to be causing malfunction.
Connector Terminal Check Method
1. Check the connection condition of each female terminal.
2. Insert male terminal into the female terminals to
check for looseness.
End Of Sie
FOREWORD
A6E778058000W02
•
Always perform basic power window system inspection before troubleshooting.
•
Troubleshooting gives content unique to trouble caused by problems in the automatic window return function.
End Of Sie
TROUBLESHOOTING [POWER WINDOW SYSTEM]
YDE7780W001
YDA8180W000