Mazda 6 2002, Руководство по ремонту

Страница: 1161 / 1248

BASIC SYSTEM
U–15
U
AIR FILTER REMOVAL/INSTALLATION
A6E851661140W03
1. Remove the glove compartment.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
End Of Sie
AIR FILTER INSPECTION
A6E851661140W04
1. Remove the air filter.
2. Inspect the air filter.
•
If the air filter is damaged, excessively dirty, or foul smelling, replace the air filter.
Note
•
The air filter cannot be reused by cleaning it with water or compressed air.
•
Replace the air filter at the following interval, depending on operating conditions.
End Of Sie
A/C UNIT REMOVAL/INSTALLATION
A6E851661130W01
1. Disconnect the negative battery cable.
2. Discharge the refrigerant from the system. (See
U–9 RECOVERY .) (See U–9 CHARGING .)
3. Drain the engine coolant. (See E–4 ENGINE COOLANT REPLACEMENT .)
4. Remove the dashboard. (See S–82 DASHBOARD REMOVAL/INSTALLATION .)
5. Remove the theft-deterrent control module. (See T–86 THEFT-DETERRENT CONTROL MODULE REMOVAL/
INSTALLATION .)
Caution
•
If moisture or foreign material enters the refrigeration cycle, cooling ability will be lowered and
abnormal noise will occur. Always immediately plug open fittings after removing any refrigeration
cycle parts to keep moisture or foreign material out of the cycle.
1 Air filter cover
2 Air filter
A6E8516W018
Destinations Type
Interval (year or
km {miles})
Europe (L.H.D.
U.K.) specs. Aldehyde, pollen,
and a dust removal 1 or 20,000
{12,500}
Pollen, and a dust
removal 2 or 40,000
{25,000}
GCC specs.
—
1 or 20,000
{12,500}