Mazda 6 2002, Руководство по ремонту

Страница: 436 / 1248

AUTOMATIC TRANSAXLE
K–29
K
6. Install the solenoid valve in the control valve body.
Tightening torque
7.8—10.8 N·m
{80—110 kgf·cm, 70—95.4 in·lbf}
7. Install the control valve body. (See K–34
CONTROL VALVE BODY REMOVAL .)
8. Install the under cover.
9. Connect the negative battery cable.
10. Add ATF and, with the engine idling, inspect the
ATF level and inspect for leakage. (See K–12
Automatic Transaxle Fluid (ATF) Level
Inspection
.)
11. Carry out the mechanical system test. (See K–6 MECHANICAL SYSTEM TEST .)
12. Carry out the road test. (See K–9 ROAD TEST .)
End Of Sie
PCM INSPECTION
A6E561418880W01
1. Inspect the PCM. (See F–45 PCM INSPECTION .)
End Of Sie
PCM REMOVAL/INSTALLATION
A6E561418880W02
1. Remove and install the PCM. (See F–43 PCM REMOVAL/INSTALLATION .)
End Of Sie
AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION
A6E561401030W07
1. Disconnect the negative battery cable.
2. Remove the battery and battery tray.
3. Remove the aircleaner component. (See
F–10 INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
4. Remove the front tires and splash shield.
5. Remove the under cover.
6. Remove the steering gear and power steering pipe. (See
N–10 STEERING GEAR AND LINKAGE REMOVAL/
INSTALLATION .)
7. Remove the front auto leveling sensor. (See T–32 FRONT AUTO LEVELING SENSOR REMOVAL/
INSTALLATION .)
8. Drain the ATF. (See K–13 AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT .)
Warning
•
Improperly jacking a transaxle is dangerous. It can slip off the jack and may cause serious injury.
Caution
•
To prevent the torque converter and transaxle from separating, remove the transaxle without
tilting it toward the torque converter.
9. Remove in the order shown in the figure.
10. Install in the reverse order of removal.
11. Adjust the headlight zeroset. (See
T–31 HEADLIGHT ZEROSET .)
12. Add ATF to the specified level. (See K–13 AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT .)
13. Carry out the mechanical system test. (See K–6 MECHANICAL SYSTEM TEST .)
×
: Test to be performed after the service work
14. Carry out the road test. (See K–9 ROAD TEST .)
A6E5614W045
Service item
Test item
Line
pressure
test
Stall test
Time lag
test
ATX replacement
×
ATX overhaul
× × ×
Torque converter
replacement
× ×
Oil pump
replacement
×
Clutch system
replacement
× ×