Mazda 6 2002, Руководство по ремонту

Страница: 882 / 1248

S–122
TROUBLESHOOTING [POWER WINDOW SYSTEM]
Automatic Window Return Function Inspection
IG OFF Timer Function Inspection
STEP INSPECTION ACTION
1
•
Turn ignition switch to ON position.
•
Lower driver-side front window completely.
•
Use power window main switch to close
driver's window in automatic mode.
•
Does window automatically reverse even
though the glass does not encounter a
foreign object while it is going up in
automatic mode?
Yes Go to Step 1 of NO. 3 DRIVER-SIDE FRONT WINDOW
REVERSES EVEN THOUGH THE GLASS DOES NOT
ENCOUNTER A FOREIGN OBJECT WHILE IT IS GOING
UP IN AUTOMATIC MODE.
No Go to next step.
2
•
Lower driver-side front window completely.
•
Take a hammer and hold it against the inside
of the top of the window frame so that the
window will hit its handle when it is closed.
•
Raise the window using automatic mode.
•
When the window hits the hammer handle,
does it immediately reverse and go down to
approximately 200 mm {7.87 in} from the
completely closed position?
Yes
•
Automatic window return function inspection is normal.
•
Go to IG OFF timer function inspection.
No Go to Step 1 of NO. 2 DRIVER-SIDE FRONT WINDOW
DOES NOT REVERSE, EVEN WHEN ENCOUNTERING A
FOREIGN OBJECT IN ITS PATH.
STEP INSPECTION ACTION
1
•
Turn ignition switch to ON position.
•
In automatic mode, push down power
window main switch for driver-side front
window. Window should go down within
approximately 42 seconds from ignition
switch OFF position.
•
In manual mode (finger continuously
depressing power window main switch),
window should go down within
approximately 42 seconds from ignition
switch OFF position.
•
Does driver-side front window go down?
Yes Go to next step.
No Replace power window main switch, then go to next step.
2
•
Turn ignition switch to ON position.
•
In automatic mode, pull up power window
main switch for driver-side front window.
Window cannot go up within
approximately
4 seconds from ignition switch OFF position.
•
Verify that driver-side front window does not
operate.
•
Does driver-side front window go up?
Yes Replace power window main switch, then go to next step.
No Go to next step.
3
•
Turn ignition switch to ON position.
•
Lower driver-side front window completely.
•
Take a hammer and hold it against the inside
of the top of the window frame so that the
window will hit its handle when it is closing.
•
Raise the window using manual mode.
•
When the window hits the hammer handle,
does it immediately reverse and go down to
approximately 200 mm {7.87 in} from the
completely raised position?
Yes Go to next step.
No Replace power window main switch, then go to next step.
4
•
Open any door.
•
Turn ignition switch to ON position.
•
Push/pull power window main switch for
driver-side front window within
approximately 42 seconds from ignition
switch OFF position.
•
Verify that driver-side front window does not
go up or down.
•
Does driver-side front window go up or
down?
Yes
•
Inspect door switch and related warning harness.
•
If above parts are okay, replace power window main
switch, then go to next step.
•
If above parts are incorrect, repair or replace malfunction
part(s), then go to next step.
No Go to next step.