Mazda 6 2002, Руководство по ремонту

Страница: 446 / 1248

AUTOMATIC TRANSAXLE
K–39
K
OIL COOLER REMOVAL/INSTALLATION
A6E561419900W02
1. Disconnect the negative battery cable.
2. Drain the ATF into a container. (See
K–13 AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT .)
3. Remove the radiator. (See E–6 RADIATOR REMOVAL/INSTALLATION .)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6. Add ATF to the specified level. (See
K–13 AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT .)
7. Connect the negative battery cable.
8. Inspect for oil leakage from the oil pipes and oil hoses.
9. Inspect for coolant from the hoses.
10. Inspect the ATF level and condition. (See K–12 AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION .)
11. Carry out the line pressure test. (See K–6 MECHANICAL SYSTEM TEST .)
12. Carry out the road test. (See K–9 ROAD TEST .)
WITH OIL COOLER
.
A6E5614W069
1 Oil hose
(See
K–40 Oil Pipe, Hose Clamp, Oil Hose
Installation Note .)
2 Hose clamp
(See
K–40 Oil Pipe, Hose Clamp, Oil Hose
Installation Note .)
3 Oil cooler
4 Connector bolt
5 O-ring
6 Radiator (in tank oil cooler)
(See
K–40 Radiator (In Tank Oil Cooler) Installation
Note .)