Logicube Omniclone Xi, Руководство пользователя

Страница: 70 / 98

Logicube OmniClone® Xi User’s Manual
62
10. User Replaceable Hardware
Introduction
Many of the components that make up the Logicube
OmniClone Xi are designed to be removable by the
user. This includes drive cables, drive stations and
even the power supply itself. This is beneficial in a
production setting where a company cannot afford
to send in an entire 10-Target duplication unit to
repair one drive station. Instead, Logicube can ship
a new drive station module and the user can install
it in less than one minute.
NOTE: Users who operate the OmniClone Xi unit in
a large production setting are advised to keep spare
cables, drive stations and even an extra power
supply handy in case of emergency.
Drive Cables
The UDMA, power and SATA Cables that connect
Master and Target drives to the OmniClone Xi are
designed to withstand up to 500
insertions/extractions. This means that through
proper handling, the cables can be pulled off and
attached to 500 different drives before the heads
start to wear out. Improper handling of the cables
can cause this number to go down significantly.
Because the drive cables have a significant shelf
life, they are considered consumable items and are
not covered under the same warranty as the
OmniClone Xi unit. Please contact Logicube Sales
if you need to purchase replacement cables.
Proper Handling of Drive Cables
UDMA Cables
– When removing the cable from a
drive, be sure to pull on the white tab that is