Logicube OmniClone® Xi User’s Manual
39
5.
Omnidiagnostics™
Introduction
Omnidiagnostics
is a powerful set of features that
aid in the recovery and repair of drives with bad or
weak data sectors, and in the secure erasure of
sensitive data.
NOTE:
Omnidiagnostics is an option that can be
purchased for your OmniClone Xi unit. Please
contact Logicube if you wish to purchase any of the
option packages.
Omnidiagnostics Features
Scan Target Mode
Scan Target mode scans the Target drives for weak
and bad data sectors. It uses the Read-Verify
command of the ATA specification to detect bad or
weak spots on the Target drives. When a suspect
area of the drive is detected, a sector-by-sector
analysis is performed.
If a given sector is read incorrectly one or more
times out of 10 tries, it is considered to be weak. If it
is read incorrectly 10 times out of 10, it is
considered to be bad.
Any drive that shows weak or bad sectors should
be returned to the manufacturer or retired due to
the higher risk of potential data loss.
When using Scan Target mode there are two levels
of scanning options to choose from:
Содержание Omniclone Xi
Страница 13: ...INTRODUCTION Logicube OmniClone Xi User s Manual 5 Figure 1 Logicube OmniClone Xi...
Страница 14: ......
