Logicube Omniclone Xi, Руководство пользователя

Страница: 77 / 98

VERIFICATION STATION
Logicube OmniClone® Xi User’s Manual
69
CHECKSUM.TXT will be created and written
to the system CompactFlash card.
9. Note: The CHECKSUM.TXT file will be
overwritten each time the user regenerates
or generates another drive hash.
Cloning and Verifying in One Session
Before continuing, verify the checksum.txt on the
CompactFlash card contains the correct MD5 value
and number of sectors to scan. The drive in the
Master position should be the drive used to generate
the MD5 hash stored on the CompactFlash card.
1. From anywhere in the menu system press
the
“Set”
button to enter the Settings
menu.
2. Tap the Cloning Mode icon that appears in
the upper left-hand corner. A list of the
available cloning modes appears .
3. Tap the
“Mirror”
icon.
4. A screen appears asking you what
percentage of the Master drive to clone.
Tap the numeric keypad set this value at
100% . Tap the OK icon when finished.
5. Tap the Verify icon located on the top-right
and set it to MD5 Hash . You may have to
tap this icon a few times to set it to MD5
Hash.
6.
You may now press the “
Start/Stop
” button
twice to start cloning.
Note: Each standard Drive Station and
Verification Station will power up and
the cloning process will begin.
7. After the cloning process completes, the
MD5 Verification process will begin.
Note: During the MD5 Verification
process, any standard Drive Station will
be ignored.
8. When the verification process finishes, the
OmniClone XI will display a PASS or FAIL
message. If there are any drives that failed
the MD5 verification process, the location
will be displayed on the screen. For
example,
“The following drives failed MD5:
Target 3”