THE DATABASE/BARCODE OPTION
Logicube OmniClone® Xi User’s Manual
45
Scan2- UserEnteredName2
– This is the second
line of data collected by the Barcode Scanner (i.e.
Batch Number). The entered name needs to be 18
characters or less.
Scan3- UserEnteredName3
– This is the third line
of information collected by the Barcode Scanner
(i.e. Location Number). The entered name needs to
be 18 characters or less.
Time
–
This records the time that the cloning
session completed. The time comes from the
OmniClone
Xi’s own internal clock.
Date
–
This records the date from the unit’s internal
clock.
NOTE:
Please refer t
o “
Time/Date Settings
” in
Section 3: Cloning Modes and Settings
for more
information on how to set the internal clock.
MasterModel
–
This line records the Model
Number of the Master drive.
MasterSerial
–
This line records the Serial Number
of the Master Drive.
TargetModels
–
This line records the Model
Number of each Target drive connected to the
OmniClone Xi.
TargetSerials -
This line records the Serial Number
of each Target drive connected to the OmniClone
Xi.
Mode
–
This line records the Cloning Mode used
(i.e. CleverCopy, Mirror, etc.)
Outcome
–
This records whether or not the cloning
session was completed successfully. It will either
say
SUCCESS
or
FAIL
.
MasterMD5
–
This records the MD5 hash value of
the Master drive.
TargetMD5
–
This records the MD5 hash values for
each of the Destination drives by position location.
Database.csv
The Logicube Database
™ option writes all of the
collected information for a given operation to
incremental files named
DAT###.csv
.
The “csv”
extension stands for “comma separated values” and
is a common Database format. It can be read by
most Database programs (i.e. Microsoft Excel,
Microsoft Access, dBase, etc.). These files start at
DAT000.csv and are stored on the Compact Flash
(CF) drive.
Содержание Omniclone Xi
Страница 13: ...INTRODUCTION Logicube OmniClone Xi User s Manual 5 Figure 1 Logicube OmniClone Xi...
Страница 14: ......
