Logicube Omniclone Xi, Руководство пользователя

Страница: 69 / 98

COMPACT FLASH (CF) CARD
Logicube OmniClone® Xi User’s Manual
61
Config.ini File
This file resides on the CF drive and allows the
User to control two different functions:
1. Turn the audible buzzer ON and OFF (for
units purchased before 2007).
2.
Turn the “Dirty Bit” Activation ON or OFF.
Audible Buzzer
The OmniClone
Xi’s Light Bar has an audible
buzzer that sounds whenever a cloning session is
complete or the unit stops with an error.
For units purchased before 2007, this buzzer can
be turned ON and OFF in the Config.ini file:
Turn the buzzer ON by setting
Buzzer=1 .
Turn the buzzer OFF by setting
Buzzer=0 .
Note: For units purchased after 2006, the audible
buzzer cannot be turned on or off without
disconnecting the Light Bar.
Dirty Bit for NTFS CleverCopy
The “Dirty Bit” on an NTFS partition tells it to run
Chkdsk on the next boot. This feature is handy to fix
any errors that might be cloned to the Target drive
from the Master; however it does increase the time
of the cloned Target drive’s first boot.
This feature can be turned ON and OFF in the
Config.ini file:
Turn the Dirty Bit ON by setting
DirtyBit=1 .
Turn the Dirty Bit OFF by setting
DirtyBit=0 .