Logicube Omniclone Xi, Руководство пользователя

Страница: 86 / 98

FAQS
Logicube OmniClone® Xi User’s Manual
78
Q : Can I clone to/from laptop drives?
A : Yes. Logicube sells 2.5"
and 1.8” drive adapters, and can provide adapters to many of the
special drive connections on the market. Please call for availability.
Q : How does the Logicube OmniClone Xi handle bad sectors encountered on the Master and
Target drives during cloning?
A
: On the Master drive, if OmniDiagnostic™ has been installed and its Recover feature has been
enabled, the Logicube OmniClone Xi will attempt to recover the data from any bad sectors
encountered.
If OmniDiagnostic™ has not been installed or its Recover feature has not been enabled, the
Logicube OmniClone Xi will immediately skip over any bad sectors on the Master drive. Note that
several attempts will be made to correctly read the sector before skipping.
On the Target drive, with the Verify setting enabled, the Logicube OmniClone Xi will also skip
over any bad sectors. If the Verify setting is disabled, the Logicube OmniClone Xi will not detect
bad sectors on the Target and the cloning procedure will continue regardless.
Q
: Can I clone drives with virus protection software installed?
A : Yes, but remember to decline the "repair" of the target drive should a virus protection program
complain about an altered master boot record, etc.
Q : How does the Logicube OmniClone Xi determine the size of partitions to create on the Target
drive?
A : In the default Clever Clone mode, all known partition types (i.e. FAT16, FAT32 and NTFS) are
scaled proportionally to the ratio of Master/Target size. Note, however, that FAT16 partitions will
not exceed 2.1 GB when scaled up, nor be smaller than 32 MB when scaled down.
All unknown partitions (e.g. HPFS, UNIX, etc.) are mirrored, that is they maintain their size.
Q : What is the difference between 100% (Mirror) Clone
™ and CleverCopy?
A : 100% Clone simply copies the user-designated percentage of all sectors on a hard drive
starting from sector one. It does not look at drive structures and thus can copy any type of known
or unknown partition. This mode performs a bit-by-bit copy of the drive.
CleverCopy analyzes the drive structures prior to cloning and only copies sectors that are
occupied by useful files and data. It also adjusts the various drive structures to assure a valid and
fully partitioned target drive.