Logicube Omniclone Xi, Руководство пользователя

Страница: 76 / 98

VERIFICATION STATION
Logicube OmniClone® Xi User’s Manual
68
that will be used to compare MD5 values. The
checksum.txt file looks similar to the sample below:
7A8C05C8223BED18C85527DE471C5CB1,1000000
In the sample above, the MD5 value is
7A8C05C8223BED18C85527DE471C5CB1, and
the second value tells the unit to use the first
1000000 sectors of the drive.
The Checksum.txt file can be opened and edited in
Notepad.exe or another text editing utility. It can be
accessed by inserting the CF drive in a card reader
or through the USB port of the OmniClone Xi.
How to use the Verification Station
Generating the Master MD5 Hash Value using the OmniClone Xi
1. Attach the Master drive to the Target 1
Verification Station.
Note: The Master drive must be
attached to the Target 1 Verification
Station. The OmniClone Xi will not
generate the MD5 hash from any other
Target position.
2. From anywhere in the menu system press
the
“Set”
button to enter the Settings menu.
3. Tap the Cloning Mode icon that appears in
the upper left-hand corner. A list of the
available cloning modes appears .
4. Tap the
“Checksum”
icon. You should now
see a
“Checksum”
icon on the upper left-
hand corner and another
“Checksum”
icon
on the right side of the screen.
5. Tap the
“Checksum”
icon on the right side
of the screen. You will be presented with two
options.
6. Tap
“Create MD5”
.
7. You may now press the
“Start/Stop”
button
twice to start the MD5 calculation.
8. When the MD5 hash has completed, the
screen will show the message MD5 Created
Successfully! It will also show the MD5 hash
on the screen along with the total sectors
calculated. A text file named