Logicube Omniclone Xi, Руководство пользователя

Страница: 24 / 98

CLONING MODES AND SETTINGS
Logicube OmniClone® Xi User’s Manual
16
In some OEM installations of Windows, the
Recovery or Utility partition(s) may be in a FAT,
FAT32, or NTFS file system. Most of these
Recovery or Utility partitions require to be cloned
to the target drive exactly the same size or to the
same sectors. When these partitions are
encountered, it is recommended to use either
MirrorCopy mode or Selective Partitions mode. If
using Selective Partitions mode, choose Mirror
mode for any Recovery or Utility partition. See
the section
Selective Partitions mode later in
this Section for more information on Selective
Partitions.
CleverCopy Step-by-Step
1. From anywhere in the menu system press
the
“Set”
button to enter the Settings menu.
2. Tap the Cloning Mode icon that appears in
the upper left-hand corner. A list of the
available cloning modes appears.
3. Tap the
“Clever”
icon, the CleverCopy
settings screen will appear.
4. Adjust the
“Verify”
,
“CHS”
and
“SPEED”
settings as needed. (These settings are
discussed later in this section).
5. You may now press the
“Start/Stop”
button
twice to start cloning.
NOTE : When CleverCopy scales down an NTFS
partition, it can only scale it to 55% of the
original size.
Selective Partitions
™ Mode (Optional)
This is the most elaborate and most flexible mode.
It allows the highest level of control over the cloning
process.
Selective mode allows you to select one or multiple
partitions to clone. It also allows you to choose a
unique copy method
2
to use for each. The available
methods are:
CleverCopy
–
Allows the OmniClone Xi determine
the best (usually fastest) way to clone. It works with
all FAT16/FAT32 and NTFS type partitions.
2
Note that not all modes are available for all partition types.