Logicube Omniclone Xi, Руководство пользователя

Страница: 28 / 98

CLONING MODES AND SETTINGS
Logicube OmniClone® Xi User’s Manual
20
2. Tap the Cloning Mode icon that appears in
the upper left-hand corner. A list of the
available cloning modes appears.
3. Tap the
“Mirror”
icon.
4. A screen appears asking you what
percentage of the Master drive to clone. Tap
the numeric keypad to adjust this value from
0
– 100%. If a value of 99% or less is chosen
for the FRONT of the drive, the unit will also
ask for a percentage from the REAR of the
drive. This value can be set to the total size
of the remaining space.
For example, if you were to enter 20 for the
front and 30 for the back, MirrorCopy would
copy the first 20% of the Master drive, skip
over the next 50% and clone the remaining
30%.
5. You may now press
the “
Start/Stop
” button
twice to start cloning.
Master Manager Mode (Optional)
Master Manager mode is useful in the creation of a
multi-
partition “Master Manager drive”. Many IT
technicians prefer to store multiple partitions (e.g.
one for accounting, one for marketing, etc.) on a
single Master Manager drive. When a new PC is to
be configured or a drive crash occurs, all the tech-
nician needs to do is select that partition and clone
it.
The Master Manager mode is also useful for
creating backups of drive partitions containing
important data. The Logicube OmniClone Xi can
hold up to 24 partitions on one Master Manager
drive. Drives greater than 2TB in capacity have
been successfully tested with the Master Manager
mode.
At this time, drives with the Windows 7 Operating
System are not supported in the Master Manager
mode.
IMPORTANT NOTE: Software version 1.7RC52 and
above uses GPT for the Master Manager drive to
support drives greater than 2TB. Older Master Manager
drives created prior to software version 1.7RC52 will see
a message stating:
“Modification to an MBR based Master Manager
d
rive format is not supported by this release”