LevelOne IES-0883, Руководство пользователя

Страница: 88 / 152

IES-0883 User Manual Page 87
MODE specifies the duplex mode: auto, full, half.
4. Example:
The following example shows the use of duplex MODE ( full ) to the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#duplex full
switch_a(config-if)#
Flow control:
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2. Usage:
Use flowcontrol on command to enable flow control, and configure the flow control
mode for the port.
Use the
no flowcontrol
to disable this function.
3. Command Syntax:
flowcontrol on
no flowcontrol
4. Example:
The following example shows the use of
flowcontrol on
to the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#flowcontrol on
switch_a(config-if)#
Port Status
1. Command Mode: Exec mode or Privileged Exec mode
Logon to Exec Mode (View Mode) or Privileged Exec Mode (Enable Mode).
The
switch_a> or switch_a# prompt will show on the screen.
switch_a>
switch_a#
2. Usage:
Use the
show interface
command to display interface configuration and status.