LevelOne IES-0883, Руководство пользователя

Страница: 84 / 152

IES-0883 User Manual Page 83
Use this command to set the interval when the configuration would be automatically
saved. The range of interval value is from 5 to 65535. And the default value is 30 seconds.
3.
Command Syntax:
service auto-config interval WORD
WORD specifies the interval value.
4. Example:
The following example sets the interval WORD (
10
) when the configuration would be
automatically saved to switch:
switch_a(config)#service auto-config interval 10
switch_a(config)#
Firmware Upgrade
1. Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The
switch_a#
prompt will show on the screen.
switch_a#
2.
Usage:
Use install image command to upgrade firmware from tftp server to switch.
3. Command Syntax:
install image IP-ADDRESS WORD
IP-ADDRESS specifies the IP address of tftp server.
WORD specifies the file name to be upgraded to switch.
4. Example:
The following example specifies upgrading firmware (file name:
flash.tgz
) from tftp server
(IP address:
192.168.1.100)
to switch:
switch_a#install image 192.168.1.100 flash.tgz
switch_a#
Please follow the message on the screen during the firmware upgrade process. Do not
turn off the power or perform other functions during this period of time.