LevelOne IES-0883, Руководство пользователя

Страница: 66 / 152

IES-0883 User Manual Page 65
creation (if dynamic VLAN creation is enabled), registration, and deregistration of
VLANs on the trunk port.
4. Update Setting: Click “Update Setting” button when you finished Per port setting.
IGMP Snooping
1. IGMP mode: Click “IGMP mode” drop-down menu from “IGMP mode” drop-down list to
choose “Disable”, “Passive”, or “querier” for the switch. Disable: Disable IGMP on the
switch. Passive: The switch with only multicast-data-forwarding capability. Querier: The
switch acts as the querier for the network. There is only one querier on a network at
any time.
2. Update Setting: Click “Update Setting” button when you finished IGMP mode settings.
3. VLAN ID: Click “VLAN ID” drop-down menu from “VLAN ID” drop-down list to choose
the VLAN under configuration for the switch.
4. IGMP version: Click “IGMP version” drop-down menu from “IGMP version” drop-down
list to choose “1”, “2”, or “3” for the switch.
5. Fast-leave: Click “fast-leave” drop-down menu from “fast-leave” drop-down list to
choose “Enable” or “Disable” for the switch. Enable this function will allow members of a
multicast group to leave the group immediately when an IGMP Leave Report Packet is
received by the Switch.
IGMP querier:
1. Query-interval: Click in the “query-interval” textbox and specify a new number from 1 ~
18000. The query-interval field is used to set the time (in seconds) between
transmitting IGMP queries. Entries between 1 and 18000 seconds are allowed. Default
= 125.
2. Max-response-time: Click in the “max-response-time” textbox and specify a new
number from 1 ~ 124. This determines the maximum amount of time in seconds
allowed before sending an IGMP response report. The max-response-time field allows
an entry between 1 and 124 (seconds). Default = 10.
IGMP passive snooping:
1. Report suppression: Click “report suppression” drop-down menu from “report