LevelOne IES-0883, Руководство пользователя

Страница: 130 / 152

IES-0883 User Manual Page 129
switch_a(config)#
Retransmit:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to specify the number of times the Switch transmits each radius
request to the server before giving up.
3. Command Syntax:
radius-server retransmit RETRIES
no radius-server retransmit
RETRIES <1-100> Specifies the retransmit value. Enter a value in the range 1 to 100.
4. Example:
The following example specifies the retransmit value
12
:
switch_a(config)#radius-server retransmit 12
switch_a(config)#
Port Authentication
Authentication State:
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2. Usage:
Use
dot1x reauthetication
command to enable reauthentication on a port.
Use
no dot1x reauthetication
command to disable reauthentication on a port.
3. Command Syntax:
(no) dot1x reauthentication
4.
Example:
The following example specifies to enable reauthetication on the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#dot1x reauthentication