Lenovo Flex System Fabric CN4093, Инструкция по применению

Страница: 23 / 634

© Copyright Lenovo 2017 Preface
23
 Chapter 19, “Edge Virtual Bridging (EVB) ,” discusses the IEEE 802.1Qbg—a
standards ‐ based protocol that defines how virtual Ethernet bridges exchange
configuration information. EVB bridges the gap between physical and virtual
network resources, thus simplifying network management.
 Chapter 20, “Static Multicast ARP ,” discusses the configuration of a static ARP
entry with multicast MAC address for Microsoft’s Network Load Balancing
(NLB) feature to function efficiently.
 Chapter 21, “Unified Fabric Port ,” describes how UFP logically subdivides a
high ‐ speed physical link connecting to a server NIC or to a Converged Network
Adapter (CNA). UFP provides a switch fabric component to control the NIC.
 Chapter 22, “Switch Partition ,” describes the creation of multiple partitions
within a switch to form a virtual switching context with respect to data plane
partition of a switch.
Part 5: IP Routing
 Chapter 23, “Basic IP Routing,” describes how to configure the CN4093 for IP
routing using IP subnets, BOOTP, and DHCP Relay.
 Chapter 24, “Internet Protocol Version 6,” describes how to configure the
CN4093 for IPv6 host management.
 Chapter 25, “Using IPsec with IPv6,” describes how to configure Internet
Protocol Security (IPsec) for securing IP communications by authenticating and
encrypting IP packets, with emphasis on Internet Key Exchange version 2, and
authentication/confidentiality for OSPFv3.
 Chapter 26, “Routing Information Protocol,” describes how the Enterprise NOS
software implements standard Routing Information Protocol (RIP) for
exchanging TCP/IP route information with other routers.
 Chapter 27, “Internet Group Management Protocol,” describes how the
Enterprise NOS software implements IGMP Snooping or IGMP Relay to
conserve bandwidth in a multicast ‐ switching environment.
 Chapter 28, “Multicast Listener Discovery,” describes how Multicast Listener
Discovery (MLD) is used with IPv6 to support host users requests for multicast
data for a multicast group.
 Chapter 29, “Border Gateway Protocol,” describes Border Gateway Protocol
(BGP) concepts and features supported in Enterprise NOS.
 Chapter 30, “OSPF,” describes key Open Shortest Path First (OSPF) concepts
and their implemented in Enterprise NOS, and provides examples of how to
configure your switch for OSPF support.
 Chapter 31, “Protocol Independent Multicast ,” describes how multicast routing
can be efficiently accomplished using the Protocol Independent Multicast (PIM)
feature.
Part 6: High Availability Fundamentals
 Chapter 32, “Basic Redundancy,” describes how the CN4093 supports
redundancy through aggregation and Hotlinks.
 Chapter 33, “Layer 2 Failover,” describes how the CN4093 supports
high ‐ availability network topologies using Layer 2 Failover.