Lenovo Flex System Fabric CN4093, Инструкция по применению

Страница: 353 / 634

© Copyright Lenovo 2017 Chapter 19: Edge Virtual Bridging
353
EVB Configuration
This section includes the steps to configure EVB based on the following values:
 Profile number: 1
 Port number: 1
 Retry interval: 8000 milliseconds
 VSI Database:

Manager IP: 172.31.37.187

Port: 80
Note:
VSI Database can be accessed via HTTP or HTTPS. The manager IP can
be configured with an IPv4 or IPv6 address.
1.
Create an EVB profile.
2.
Enable Reflective Relay.
3.
Enable VSI discovery.
4.
Add EVB profile to port.
5.
Configure ECP retransmission interval.
6.
Set VSI database information.
CN 4093(config)# virt evb profile 1
(Enter number from 1 ‐ 16)
CN 4093(conf-evbprof)# reflective-relay
CN 4093(conf-evbprof)# vsi-discovery
CN 4093(conf-evbprof) # exit
CN 4093(config)# interface port 1
CN 4093(config-if)# evb profile 1
(Enter EVB profile ID)
CN 4093(config-if)# exit
CN 4093(config)# ecp retransmit-interval 8000
(Enter retransmission interval in milliseconds (100 ‐ 9000))
CN 4093(config)# virt evb vsidb 1
CN 4093(conf-vsidb)# protocol {http|https}
(Select VSI database protocol; default is HTTP)
CN 4093(conf-vsidb)# host 172.31.37.187 [data-port|extm-port|mgt-port]
(Set VSI database Manager IP)
CN 4093(conf-vsidb)# port 80
(Set VSI database Manager port)
CN 4093(conf-vsidb)# filepath “vsidb”
(Set VSI database document path)
CN 4093(conf-vsidb)# filename “all.xml”
(Set VSI database file name)
CN 4093(conf-vsidb)# update-interval 30
(Set update interval in seconds)
CN 4093(conf-vsidb)# exit