Lenovo Flex System Fabric CN4093, Инструкция по применению

Страница: 288 / 634

288
CN4093 Application Guide for N/OS 8.4
Virtualization Management Servers
The CN4093 can connect with a virtualization management server to collect
configuration information about associated VEs. The switch can also automatically
push VM group configuration profiles to the virtualization management server,
which in turn configures the hypervisors and VEs, providing enhanced VE
mobility.
One virtual management server must be assigned on the switch before distributed
VM groups may be used. Enterprise NOS 8.4 currently supports only the VMware
Virtual Center (vCenter).
Assigning a vCenter
Assigning a vCenter to the switch requires the following:
 The vCenter must have a valid IPv4 address which is accessible to the switch
(IPv6 addressing is not supported for the vCenter).
 A user account must be configured on the vCenter to provide access for the
switch. The account must have (at a minimum) the following vCenter user
privileges:

Network

Host Network > Configuration

Virtual Machine > Modify Device Settings
Once vCenter requirements are met, the following configuration command can be
used on the CN4093 to associate the vCenter with the switch:
This command specifies the IPv4 address and account username that the switch
will use for vCenter access. Once entered, the administrator will be prompted to
enter the password for the specified vCenter account.
The
noauth
option causes to the switch to ignores SSL certificate authentication.
This is required when no authoritative SSL certificate is installed on the vCenter.
Note:
By default, the vCenter includes only a self ‐ signed SSL certificate. If using
the default certificate, the
noauth
option is required.
Once the vCenter configuration has been applied on the switch, the CN4093 will
connect to the vCenter to collect VE information.
CN 4093(config)# virt vmware vcspec
<vCenter IPv4 address> <username>
[ noauth ]