Lenovo Flex System Fabric CN4093, Инструкция по применению

Страница: 245 / 634

© Copyright Lenovo 2017 Chapter 13: Stacking
245
Binding Members to the Stack
You can bind Member switches to a stack
csnum
using either their
asnum
or
chassis UUID and bay number:
To remove a Member switch, execute the following command:
To bind all units of a stack, use the command:
The
stack bind
command automatically assigns switch numbers to all attached
switches in the stack that do not yet have a number assigned.
Assigning a Stack Backup Switch
To define a Member switch as a Backup (optional) which will assume the Master
role if the Master switch fails, execute the following command:
CN 4093(config)# stack switch-number
<csnum>
universal-unic-id
<chassis UUID>
CN 4093(config)# stack switch-number
<csnum>
bay
<bay number (1 ‐ 4)>
‐ or ‐
CN 4093(config)# stack switch-number
<csnum>
bind
<asnum (1 ‐ 16)>
CN 4093(config)# no stack switch-number
<csnum>
CN 4093(config)# stack bind
CN 4093(config)# stack backup
<csnum>
‐ or ‐
CN 4093(config)# stack bind