Lenovo Flex System Fabric CN4093, Инструкция по применению

Страница: 163 / 634

© Copyright Lenovo 2017 Chapter 9: Ports and Link Aggregation (LAG)
163
 If you change the Spanning Tree participation of any LAG member to
enabled
or
disabled
, the Spanning Tree participation of all members of that LAG
should be changed similarly.
 When a LAG is enabled, the LAG’s Spanning Tree participation setting takes
precedence over that of any LAG member.
 You cannot configure a LAG member as a monitor port in a port ‐ mirroring
configuration.
 LAGs cannot be monitored by a monitor port; however, LAG members can be
monitored.
 All ports in static LAGs must have the same link configuration (speed, duplex,
flow control).
Configuring a Static LAG
In the following example, three ports are aggregated between two switches.
Figure 10.
LAG Configuration Example
Prior to configuring each switch in the preceding example, you must connect to the
appropriate switch’s Command Line Interface (CLI) as the administrator.
Note:
For details about accessing and using any of the menu commands described
in this example, see the Enterprise NOS Command Reference .
Application Switch
Lenovo Blade Chassis
Switch
Application Switch LAG 3: Ports 2, 12, and 22
Lenovo Blade LAG 1: Ports EXT1, EXT2, and EXT3
LAG