Lenovo Flex System Fabric CN4093, Инструкция по применению

Страница: 549 / 634

© Copyright Lenovo 2017 Chapter 35: Link Layer Discovery Protocol
549
LLDP Receive Features
Types of Information Received
When the LLDP receive option is enabled on a port (see “Enabling or Disabling
LLDP” on page 543 ), the port may receive the following information from
LLDP ‐ capable remote systems:
 Chassis Information
 Port Information
 LLDP Time ‐ to ‐ Live
 Port Description
 System Name
 System Description
 System Capabilities Supported/Enabled
 Remote Management Address
The CN4093 stores the collected LLDP information in the MIB. Each remote
LLDP ‐ capable device is responsible for transmitting regular LLDP updates. If the
received updates contain LLDP information changes (to port state, configuration,
LLDP MIB structures, deletion), the switch will set a change flag within the MIB for
convenient notification to SNMP ‐ based management systems.
Note:
In stacking mode, both the Master and the Backup receive LLDP
information for all the ports in a stack and update the LLDP table. The Master and
Backup switches synchronize the LLDP tables.
Viewing Remote Device Information
LLDP information collected from neighboring systems can be viewed in numerous
ways:
 Using a centrally ‐ connected LLDP analysis server
 Using an SNMP agent to examine the CN4093 MIB
 Using the CN4093 Browser ‐ Based Interface (BBI)
 Using CLI or isCLI commands on the CN4093
Using the isCLI the following command displays remote LLDP information:
CN 4093(config)# show lldp remote-device [
<index number>
]