Lenovo Flex System Fabric CN4093, Инструкция по применению

Страница: 62 / 634

62
CN4093 Application Guide for N/OS 8.4
Setup Part 1: Basic System Configuration
When Setup is started, the system prompts:
1.
Enter
y
if you will be configuring VLANs. Otherwise enter
n
.
If you decide not to configure VLANs during this session, you can configure them
later using the configuration menus, or by restarting the Setup facility. For more
information on configuring VLANs, see the Enterprise NOS Application Guide .
Next, the Setup utility prompts you to input basic system information.
2.
Enter the year of the current date at the prompt:
Enter the four ‐ digits that represent the year. To keep the current year, press
<Enter>
.
3.
Enter the month of the current system date at the prompt:
Enter the month as a number from 1 to 12. To keep the current month, press
<Enter>
.
4.
Enter the day of the current date at the prompt:
Enter the date as a number from 1 to 31. To keep the current day, press
<Enter>
.
The system displays the date and time settings:
5.
Enter the hour of the current system time at the prompt:
Enter the hour as a number from 00 to 23. To keep the current hour, press
<Enter>
.
6.
Enter the minute of the current time at the prompt:
Enter the minute as a number from 00 to 59. To keep the current minute, press
<Enter>
.
"Set Up" will walk you through the configuration of
System Date and Time, Spanning Tree, Port Speed/Mode,
VLANs, and IP interfaces. [type Ctrl-C to abort "Set Up"]
System Date:
Enter year [2012]:
System Date:
Enter month [1]:
Enter day [3]:
System clock set to 18:55:36 Wed Jan 28, 2012.
System Time:
Enter hour in 24-hour format [18]:
Enter minutes [55]: