44
Hitching the implement
Pneumatic
brake [+]
Clean the pneumatic system
Prevent any dirt from entering the pneumatic system. The pneumatic
system can otherwise be seriously damaged. Material damage and in-
juries to personnel may be caused.
No water in the compressed-air circuit
Ensure that there is no water in the compressed-air circuit. Otherwise
the braking capacity may be affected. This may cause accidents, ma-
terial damage and injury to personnel.
Pneumatic couplings are only available if the implement was ordered
with compressed-air brakes as additional equipment.
> Check that the quick-release couplings are clean.
> Connect the quick-release couplings for the pneumatic tubes to the
tractor's pneumatic retainers.
Connecting the
pneumatic coupling
> Ensure that the pneumatic valve on the tractor is open.
> Connect the red quick-release coupling to the corresponding trac-
tor valve.
> Connect the yellow quick-release coupling to the corresponding
tractor valve.
> Briefly activate the bleed valve on the underneath of the air tank to
bleed the water.
Quick-release
Air cylinder
All manuals and user guides at all-guides.com