Operation
79
Depositing the
bale
Deposit the bale on level ground
Always deposit the discharged bale on a flat surface. Never deposit
the bale on a slope. The deposited bale must not keep moving uncon-
trollably as a result of its weight and ejection speed. A rolling bale can
result in damage or serious or fatal injuries.
Distance from the rear flap
Maintain a safe distance from the rear flap. Ensure that there is nobo-
dy in the area of the rear flap. The rear flap can open by itself, causing
the bale to roll out of the bale chamber. Serious or fatal injury can be
the result.
N
OTE
When the bale is not deposited in the stop position, raise the pick-up
equipment and move to the depositing location.
> Open the rear flap via the control device.
The bale is discharged.
> “Open rear flap” is displayed.
> Close the rear flap via the control device.
→
»Closing the rear flap«, page 46.
> Leave the control device lever in the position for closing the rear
flap for approximately 3 seconds to allow the pressure to build up
for the default bale density.
All manuals and user guides at all-guides.com