Storing the machine
127
Preparation for winter
storage
At the end of the season the machine must be prepared for winter
storage.
If the machine is being put away for a short or longer period of time it
is recommended that you lubricate and clean it first. If it is lubricated
first you will prevent dirt, fertilizer and water from entering the
bearings.
The advantages of this method of working are:
•
additional checks on the machine right after work,
•
ensuring the longevity of the machine,
•
less delays due to problems while working with the machine.
T
IP
When using a high-pressure cleaner, do not aim it at the seals and the
breathers. That way you will prevent dirt and moisture from entering
the gearboxes.
Furthermore, do not set up electrical components. Water can cause
electrical failures.
See »Be careful while cleaning with high pressure cleaners« on
page 123,
Clean the machine.
Let the machine dry.
Paint any damaged paintwork.
Lubricate and oil all points once again to ensure conservation.
See paragraph »Maintenance intervals« on page 131.
Provide white parts such as piston rods of hydraulic cylinders with
preservative grease or inject the (white) metal parts of the machine
with preserving agent (supplied) for protection against corrosion
I
NDICATION
Only use grease that would not harden or dry. That will prevent dam-
age cylinder oil seal(s).
Содержание Exacta-TL-GEOSPREAD GS3
Страница 6: ...Preface 6 ...
Страница 166: ...Notes 166 Notes ...